MyLiteratureTechLife.COM » Directadmin

Ports to configure in firewall for Directadmin

shk — Fri, 22 Oct 2010 21:09:46 +0000

20,21: FTP. Note that ftp will use a “random high port number” if the client is in PORT mode, so you may need to add a port range into your /etc/proftpd.conf file to allow ftp connections, eg: PassivePorts 35000 35999 and then open that port range as well in your firewall. 22: ssh access 25, [...]

Ports to configure in firewall for Directadmin is a post from: MyLiteratureTechLife.COM

CSF on DirectAdmin

shk — Fri, 22 Oct 2010 21:04:12 +0000

There was a time when I was about to select a firewall for a server which had DirectAdmin installed and I choosed CSF. CSF is one of the best firewall available for hosting servers. Installation of CSF in directAdmin is really easy, just download csf. Extract it and Install it Just a 3 step installation. [...]

CSF on DirectAdmin is a post from: MyLiteratureTechLife.COM

perl error in CSF installation

shk — Fri, 22 Oct 2010 20:51:37 +0000

[root@mailserver csf]# service <a title="csf" href="http://www.myliteraturetechlife.com/enableing-passive-mode-in-ftp-server-with-csf-firewall/">csf</a> status Status of csf:Can't locate LWP/UserAgent.pm in @INC (@INC contains: /usr/local/cpanel /etc/csf /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /usr/sbin/csf line 3033. BEGIN failed--compilation aborted at /usr/sbin/csf line 3033. The error is because of perl module installation, which is the basic requirement of csf and the [...]

perl error in CSF installation is a post from: MyLiteratureTechLife.COM

How to increase Qmail sending limit

shk — Sun, 15 Aug 2010 11:19:59 +0000

First verify that these setting have not already been customized, as running the commands will overwrite any changes they have made. The following command will show you whether those files exist: ls /var/qmail/control | egrep 'timeoutremote|timeoutsmtpd|concurrencyremote' Run following command to update limits echo "120" > /var/qmail/control/timeoutremote echo "120" > /var/qmail/control/timeoutsmtpd echo "40" > [...]

How to increase Qmail sending limit is a post from: MyLiteratureTechLife.COM

How to open and close port in iptables ?

shk — Sat, 15 May 2010 11:37:21 +0000

Few of very simple steps 1) Login using root 2) Enter following command to open port in iptables iptables -A INPUT -p tcp --dport 25 -j ACCEPT 3) Enter following command to close port in iptables iptables -A INPUT -p tcp --dport 25 -j DROP 4) Save iptables service iptables save OR /etc/init.d/iptables save 5) [...]

How to open and close port in iptables ? is a post from: MyLiteratureTechLife.COM

why sites suddenly stopped working in dedicated/virtual private servers

shk — Wed, 17 Mar 2010 12:23:40 +0000

VeriSign has made some changes recently which are applied since March 1, 2010. You can read detail by clicking here How do I fix it? You need to log in to your control panel and modify the affected domain name’s zone file, using the table below as an example. To Modify or Add DNS Records [...]

why sites suddenly stopped working in dedicated/virtual private servers is a post from: MyLiteratureTechLife.COM

Using both php4 and php5 at the same time in Directadmin

shk — Mon, 14 Sep 2009 11:25:57 +0000

If you wish to use both php4 and php5 at the same time, custombuild will allow you to do this. Note that you must have the 2 copies of php running as different types, one as CLI and one as CGI (suPhp). You cannot have both running as CLI, and similarly you cannot have both [...]

Using both php4 and php5 at the same time in Directadmin is a post from: MyLiteratureTechLife.COM